A dental bridge fills a gap with a false tooth, called a pontic, that is held by the teeth on either side. In the conventional design those neighbouring teeth are shaped and crowned, and the pontic is joined between the crowns as one fixed piece.
A bridge restores chewing and appearance in a week or so without surgery. Its main cost is biological: sound neighbouring teeth are cut down to carry it, the bone under the gap continues to shrink, and if one supporting tooth fails the whole bridge is lost.
What Dental Bridge involves
At the first visit the supporting teeth are numbed and reduced by about 1 to 2 mm all round. A digital scan or impression records the preparation and the bite, a shade is chosen and a temporary plastic bridge is cemented. The laboratory makes the bridge in zirconia, porcelain fused to metal or another ceramic over 3 to 6 days. At try-in the dentist checks fit at the margins, contact with the gum under the pontic and the bite, then cements it permanently. A resin-bonded bridge skips most of the drilling: a wing is glued to the back of one adjacent tooth.
Who is a good candidate for Dental Bridge?
Bridges work for one or two missing teeth in a row when the neighbouring teeth are strong enough to share the load.
- You have a single gap and the adjacent teeth already have large fillings or crowns
- You cannot or do not want to have implant surgery
- You want a fixed result within one short trip
- You have a missing front tooth and sound neighbours suited to a resin-bonded bridge
- Your gums are healthy and the supporting teeth have good bone
It is usually not the right choice if:
- Gaps of three or more teeth, where the span flexes and fails
- Supporting teeth that are loose, short-rooted or have untreated decay
- People with untouched healthy neighbours who are suitable for an implant, which spares those teeth
- Gaps at the very back with no tooth behind, unless a short cantilever is appropriate
- Heavy grinders without a night guard
الخيارات التقنية
- Conventional fixed bridge: Crowns on both sides of the gap. The standard choice for back teeth.
- Cantilever bridge: Supported on one side only. Suitable for small front teeth under light bite.
- Resin-bonded (Maryland) bridge: A metal or ceramic wing bonded to enamel with minimal preparation. Conservative, but it can debond.
- Implant-supported bridge: Rests on implants instead of teeth. Used for longer gaps.
- Material choice: Zirconia for strength, layered ceramics for front-tooth translucency, metal-ceramic where space is limited.
ماذا يحدث خلال علاجك
Preparation takes 60 to 90 minutes under local anaesthetic; the fitting visit takes 30 to 60 minutes and often needs no injection. You will hear drilling and feel water spray. Between visits the temporary bridge can feel rough and you should avoid sticky food on it.
الإعداد لرحلتك
A conventional bridge needs two or three appointments spread over 5 to 8 days: preparation and scan, a try-in, then cementation. Allow a spare day for shade or bite adjustments. A resin-bonded bridge follows the same spacing with shorter visits.
- Tell the doctor about medication, allergies, pregnancy or breastfeeding, and any history of cold sores, keloid scars or autoimmune disease
- Avoid alcohol, aspirin and anti-inflammatory painkillers for a few days beforehand if your own doctor agrees, to reduce bruising
- Arrive without make-up on the treatment area and avoid sunbeds and strong sun for two weeks before
التعافي والنتائج
There is no real downtime. The gum around the prepared teeth can be sore for a few days and the teeth may be sensitive to cold for 1 to 2 weeks. The bite should feel even within days; if it feels high, it needs adjusting before you leave. Clean under the pontic daily with floss threaders, interdental brushes or a water flosser.
- Back to everyday activity: None
- When results show: Immediately on fitting
- How long they last: Often 10 to 15 years
سياسة السلامة والمخاطر والتنقيح
Bridges are dependable when the supporting teeth are sound, but they do put extra demands on those teeth.
- The nerve in a prepared tooth dying months or years later, needing root canal treatment through the bridge
- Decay at the crown margins, the most common reason bridges fail
- The bridge coming loose or a bonded wing detaching
- Porcelain chipping
- Gum inflammation or odour under the pontic if cleaning is difficult
- A gap appearing under the pontic as the bone shrinks over the years
Every written proposal arranged through Clinic-Y states what the clinic covers if a correction is needed. Ask for it before you book, not after.
Cost of Dental Bridge in Türkiye
Clinic-Y does not publish a single price for Dental Bridge, because the honest figure depends on your case. What moves it:
- Number of units, meaning crowns plus false teeth
- Material: zirconia, layered ceramic or metal-ceramic
- Any fillings, posts or root canal treatment needed on the supporting teeth first
- Laboratory quality and digital design
- Temporary bridge and any remake
Send your photographs or reports and you receive written, all-inclusive proposals from suitable teams, side by side. Reviewing your case is free.
الأسئلة المتكررة
Bridge or implant?
An implant spares the neighbouring teeth and preserves bone but needs surgery and months of healing. A bridge is quicker. If the neighbours already need crowns, a bridge becomes more attractive.
Can a bridge be repaired if one tooth under it fails?
Usually the bridge has to be cut off and remade, because it is one piece.
Will food get stuck?
Some will collect under the false tooth. Daily cleaning beneath it is essential to protect the supporting teeth.